ReadonlyalkalinityTotal-water alkalinity, ppm as CaCO₃.
ReadonlydilutedSource after RO dilution.
ReadonlydilutionShare of the brewing water that's dilution water, 0 to 1, as the recipe gave it.
ReadonlydilutionThe dilution in litres: how much RO (or whatever dilutionProfile names)
goes into the strike + sparge water. The stored fraction is a ratio for the
chemistry, but on brew day the brewer measures litres. 40 % of a 30 L
liquor is 12 L in jugs from the shop. Zero when nothing is diluted.
ReadonlykettleHow strongly the wort in the kettle is expected to resist an acid dose, in mEq per pH unit per litre of pre-boil wort.
It's per litre because the volume that matters is the one the brewer reads
off the sight glass on the day, not the planned one. Multiply by the
measured pre-boil volume to get estimateKettleBufferingMEqPerPh's answer.
We compute it here so sizing a kettle dose doesn't need the pH model run
again. See kettleBufferingPerLitreMEqPerPh for the assumption
behind it. It's a first estimate, and the brewer's own before-and-after
readings should replace it.
ReadonlymashThe same blend per vessel. Strike and sparge water are usually prepared separately, often hours apart, so each needs its own share of the dilutant measured out. These sum to the totals above. The sparge entry is all zeros for no-sparge and BIAB systems.
ReadonlymashThe mash-pH prediction, with its per-term breakdown.
Optional ReadonlymashWhat it would take to reach targetMashPh with 88 % lactic acid, on top of whatever is already dosed. Absent when the target is already met or the mash pH is undefined.
ReadonlymashWater in the mash tun, after dilution and salts.
ReadonlymashMash water volume, liters.
ReadonlyresidualMash-water residual alkalinity, ppm as CaCO₃.
ReadonlysaltHow each salt was divided between the vessels.
ReadonlysourceWater as drawn.
ReadonlysourceThe source water left in the blend after the dilutant's share.
Optional ReadonlyspargeSparge acidification, when asked for.
ReadonlyspargeThe sparge water's share of the blend. See mashDilution.
ReadonlyspargeSparge water, after dilution and salts.
ReadonlyspargeSparge water volume, liters.
ReadonlysulfateThe descriptive band for the treated total water's SO₄:Cl.
ReadonlysulfateSO₄:Cl of the treated total water, or NaN when there's no ratio because
one ion wasn't measured or both are zero. sulfateChlorideBalance
says which.
Optional ReadonlytargetThe achieved water against targetProfile, when one was supplied.
ReadonlytargetThe mash pH aimed for: the recipe's own, or DEFAULT_TARGET_MASH_PH.
ReadonlytotalVolume-weighted total, which is what reaches the kettle.
ReadonlywarningsProblems with the water worth telling the brewer about, as sentences.
The water and mash-pH section. Only present when the recipe has water data.