@beerwright/core
    Preparing search index...

    Interface DecoctionPullInput

    Input to decoctionPull.

    interface DecoctionPullInput {
        boilOffLPerHour?: number;
        currentTempC: number;
        grainAbsorptionLPerKg?: number;
        grainDisplacementLPerKg?: number;
        grainSpecificHeatRatio?: number;
        mashGrainKg: number;
        mashWaterL: number;
        potVolumeL?: number;
        rampMinutes?: number;
        returnMinutes?: number;
        returnTempC?: number;
        spec?: DecoctionSpec;
        standingLossCPerHour?: number;
        targetTempC: number;
    }

    Hierarchy (View Summary)

    Index
    boilOffLPerHour? currentTempC grainAbsorptionLPerKg? grainDisplacementLPerKg? grainSpecificHeatRatio? mashGrainKg mashWaterL potVolumeL? rampMinutes? returnMinutes? returnTempC? spec? standingLossCPerHour? targetTempC
    boilOffLPerHour?: number

    Evaporation from the decoction pot, L/h. Defaults to 1.5.

    currentTempC: number

    Temperature the mash is resting at, °C.

    grainAbsorptionLPerKg?: number

    Liquid the grain holds, L/kg. The floor on how thick a pull can be. Defaults to 1.0.

    grainDisplacementLPerKg?: number

    Volume the grain itself occupies, L/kg. Defaults to 0.6676.

    grainSpecificHeatRatio?: number

    Ratio of grain to water specific heat. Defaults to 0.4.

    mashGrainKg: number

    Grain in the mash, kilograms.

    mashWaterL: number

    Water in the mash before the pull, litres.

    potVolumeL?: number

    Decoction pot capacity, litres. Only used to raise a feasibility issue.

    rampMinutes?: number

    Minutes to bring the pull to a boil. Defaults to 12.

    returnMinutes?: number

    Minutes to return the pull to the tun. Defaults to 5.

    returnTempC?: number

    Temperature the pull is at when it is stirred back in, °C. Defaults to 98.

    spec?: DecoctionSpec

    How the brewer wants the pull taken. Defaults to a thick pull, boiled 20 minutes.

    standingLossCPerHour?: number

    Heat the resting mash loses, °C/h. Defaults to 2.

    targetTempC: number

    Temperature the step is aiming for, °C.

    Settings
    Member Visibility

    On This Page
    Properties